Brake Pads
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not required to install new brake pads when the brake discs are machined.
- Inspect and measure the thickness of the brake pad friction material. For additional information, refer to SPECIFICATIONS .
- Minor surface cracks do not require pad replacement, however, if there are missing chunks or cracks in the lining through to the backing plate, install new brake pads. For additional information, refer to BRAKE PADS for front brake pads.
- If the thickness of the friction material is less than the specified thickness, install new brake pads. For additional information, refer to BRAKE PADS for front disc brakes.
- If the friction material shows taper wear that is not within specifications, install new brake pads and verify the caliper guide pins are functioning correctly. For additional information, refer to BRAKE CALIPER GUIDE PINS INSPECTION .