Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For MKZ, the traction control switch is serviced with the Front Controls Interface Module (FCIM). For additional information, refer to REMOVAL AND INSTALLATION .

Remove the instrument panel center finish panel. For additional information, refer to REMOVAL AND INSTALLATION .
Press the retaining tabs and remove the traction control switch.

Fig 1: Locating Retaining Tabs
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.