U0010-CAN Interior Bus: Notes
For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAM.
- >>When Monitored:<< Continuously when the ignition is on. Battery voltage between 10 and 16 volts. Ignition Off Draw (IOD) fuse installed.
- >>Set Condition:<< The controller detects a short to ground on the CAN Interior Bus (125K) (+) circuit or a short to voltage on the CAN Interior Bus (125K) (-) circuit.
| Possible Causes |
|---|
| (D265) CAN INTERIOR BUS(+) (125k) CIRCUIT SHORTED TO VOLTAGE |
| (D264) CAN INTERIOR BUS(-) (125k) CIRCUIT SHORTED TO GROUND |
| (D264) CAN INTERIOR BUS(-) (125k) CIRCUIT SHORTED TO THE (D265) CAN INTERIOR BUS(+) (125k) CIRCUIT |
| TOTALLY INTEGRATED POWER MODULE (TIPM) |
| ANY CAN INTERIOR BUS MODULE |