B1BAB - Front Left Satellite Acceleration Sensor Configuration Mismatch: Notes

For wiring diagram information, refer to appropriate SYSTEM WIRING DIAGRAMS article.

Theory of Operation

When powered, the occupant restraint controller sends a test current to the impact sensors. During this test, the impact sensors discovered are checked for agreement with the pre - programmed vehicle configuration of components assigned to the module. The repair of this fault condition does not involve any external circuitry and centers on confirming the correct module and wiring is installed in the vehicle.

• >>When Monitored:<< The ORC checks for the presence of a device once at every power up during the module initialization process.
• >>Set Condition:<< This DTC sets when the ORC detects the presence of a device while the configuration of the module does not reflect a device should be present. Once set, this DTC is latched for the entire power cycle.

Always perform the Pre - Diagnostic Troubleshooting procedure before proceeding.