Test Step 1 - ACTIVE DTC
- Start the engine and allow it to reach normal operating temperature.
WARNING:
When the engine is operating, do not stand in direct line with the fan. Do not put your hands near the pulleys, belts or fan. Do not wear loose clothing. Failure to follow these instructions may result in possible serious or fatal injury.
NOTE:
Diagnose and repair any system voltage DTCs before continuing with this test.
- With the scan tool, select View DTCs.
Is the DTC Active at this time?
Yes
No
- Perform the Checking for an Intermittent DTC diagnostic procedure. Refer to Checking For An Intermittent DTC .