Test Step 1 - ACTIVE DTC

• Turn the ignition off.
• If possible, allow the vehicle to sit with the ignition off for more than 480 minutes in an environment where the temperature is consistent and above -7°C (19.4°F).
• Test drive the vehicle. The vehicle must exceed 48 km/h (30 mph) during the test drive. Do not cycle the ignition off when the test drive is completed.
• With the scan tool, select View DTCs.

Is the DTC Active or Pending at this time?

Yes 

• Go to Test Step 2 - ENGINE COOLANT TEMPERATURE 

No 

• Perform the Checking for an Intermittent DTC diagnostic procedure. Refer to Checking For An Intermittent DTC .