Test Step 1 - ACTIVE DTC
NOTE:
Diagnose any CAN - C Communication DTCs before continuing.
- Turn the ignition off.
- If possible, allow the vehicle to sit with the ignition off for more than 480 minutes in an environment where the temperature is consistent and above -7° C (19.4° F).
- Test drive the vehicle. The vehicle must exceed 48 km/h (30 mph) during the test drive. Do not cycle the ignition off when the test drive is completed.
- With the scan tool, select View DTCs.
Is the DTC Active or Pending at this time?
Yes
No