Test Step 4 - Check the Liftgate Close Driver for a Short to Ground

Fig 1: Testing Liftgate Close Driver Wire Short to Ground

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Measure the resistance between ground and the liftgate close driver circuit in the power liftgate module C1 connector.

Is the resistance less than 10k ohms?

No

• Go to Test Step 6 Test Step 6 - Liftgate Open Driver Circuit Short to Liftgate Close Driver Circuit 

Yes

• Go to Test Step 5 Test Step 5 - Check the Liftgate Close Driver Wire for a Short to Ground