Test Step 5 - Left Pinch Sensor Signal Circuit Open

Fig 1: Testing Left Pinch Sensor Signal Circuit Open

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Turn the ignition OFF.
• Disconnect the power liftgate module C2 harness connector.
• Measure the resistance of the left pinch sensor signal circuit between the power liftgate module C2 connector and the left liftgate pinch sensor connector.

Is the resistance less than 5.0 ohms?

Yes

• Replace the power liftgate module. Refer to POWER LIFTGATE CONTROL MODULE .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

No

• Repair the left pinch sensor signal circuit for an open.
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .