Test Step 2 - Power Liftgate Module

Fig 1: Identifying Power Liftgate Module C2 Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Turn the ignition OFF.
• Disconnect the power liftgate module C2 harness connector.
• Turn the ignition ON.
• Measure the voltage of the liftgate latch Cinch driver circuit.

Is there any voltage present?

No 

• Replace the power liftgate module. Refer to POWER LIFTGATE CONTROL MODULE .
• Perform the Body Verification Test. Refer to BODY VERIFICATION TEST .

Yes 

• Go to Test Step 3 - Check the Liftgate Latch Cinch Driver Circuit for a Short to Voltage .