Test Step 5 - Clear DTC in Module Setting Fault

• With the scan tool, select the module setting the DTC against the WCM.
• Clear active DTCs.

Is this DTC still active?

Yes 

• Replace/update the module that set this DTC. Refer to [For engine(s) CJRA, CGUA, CGVA] Removal and Installation .
• Perform the appropriate Verification Test. Refer to NON-DTC BASED DIAGNOSTICS (1 OF 2) and NON-DTC BASED DIAGNOSTICS (2 OF 2) .

No 

• Go to Test Step 6 - Cycle Ignition .