Selector Mechanism Overview
WARNING: This page is about a different variant/trim than selected.
- Selector Handle With Cover
- Do not remove the handle unnecessarily. For emergency release, only the cover must be removed. Refer to SELECTOR LEVER, EMERGENCY RELEASE .
- Removing and installing. Refer to SELECTOR LEVER HANDLE AND COVER .
- Center Console Cover
- For the selector mechanism.
- Removing and installing. Refer to "Center Console" in Removal and Installation .
- Selector Mechanism
- Do not grease the selector lever cable.
- Removing and installing. Refer to SELECTOR MECHANISM .
- Checking. Refer to SELECTOR LEVER CABLE, CHECKING .
- Adjusting. Refer to SELECTOR LEVER CABLE, ADJUSTING .
- Screw
- 8 Nm
- Nut
- 8 Nm
- Quantity: 4
- Gearshift Housing
- Available only together with the selector mechanism.
- Bracket
- For the selector lever cable.
- Selector Lever Cable
- Must not be removed from the selector mechanism and is replaced together as a single component.
- Transmission
- Tunnel/Body