Electromechanical Parking Brake Control Module: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Installation is in reverse order of removal.

When installing electromechanical parking brake control module make sure it is correctly seated in its mounting and is free of stress.

NOTE:

Do not use the nuts to forcibly position the electromechanical parking brake control module.

-- Tighten the nuts to 9 Nm.

-- Code the ABS control module with the => in guided fault finding.

A steering angle sensor -G85-, transverse acceleration sensor -G200-, brake pressure sensor 1 -G201- and longitudinal acceleration sensor -G251- basic setting must be done.

-- Perform basic setting for brake system (electro-mechanical parking brake).

Vehicle Diagnostic Tester, connecting and selecting functions. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING AND SELECTING FUNCTIONS .