Service Interval Display, Recoding

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

Coding from Flexible to Fixed Intervals

-- Connect the Vehicle Diagnostic Tester Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Switch on the ignition.

-- Touch button/field on screen: "Guided Functions".

NOTE:

If the displays indicated in the procedure are not shown on the display. Refer to operating Instructions for Vehicle Diagnosis Tester

-- Select in succession:

Brand
Type
Model year
Engine code

-- Confirm vehicle identification.

If the vehicle identification procedure was performed correctly, press > button for confirmation.

-- Select in succession:

"Instrument cluster" -ARROW-.

Fig 1: Diagnosis System Display: 17 - Instrument Panel Insert
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
"Adapt service interval extension".

-- Perform the Adaptation following the "Guided Functions" prompts.

End Adaptation

Indicated on display:

Fig 2: Identifying "Go To" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the Go To button -arrow- on the display.

Indicated on display:

Fig 3: Identifying "Exit" Button On Scan Tool Display

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the End -arrow- button on the screen.

-- Press the Exit button in the exit menu.

-- Turn off the ignition and disconnect the diagnostic connector.

Change in the Km-maximum values for oil change service (fixed) during the delivery inspection.

ODIS Service
-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .
-- Switch on the ignition.
-- Select the VIN.
-- Select "Work with guided fault finding"
-- Select the "control module"
-- Select "Instrument Cluster"
-- Select "identify control module".
-- Select "Guided Functions".
-- Select "Oil change service (fixed)"
-- Follow the "Guided Functions" instructions.
-- Reset "-1- Oil change service (fixed)".
-- Follow the "Guided Functions" instructions.
The maximum Km values are displayed in the Vehicle Diagnostic Tester.
-- Select "no".
-- Select the country specific maximum values until the next oil change service.
-- Adapting according to "Guided Functions".