LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat TDI SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Wiring) >> 97 Wiring >> Removal And Installation >> Vehicle Electrical System Control Module -J519- >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Electrical System Control Module -J519-: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The relay panel is clipped under the Vehicle Electrical System Control Module and can be removed.

If the Vehicle Electrical System Control Module is being replaced, then always perform the procedure CODING  to read out the code stored in the module.

Before coding the new Vehicle Electrical System Control Module, the factory mode/transport mode that was activated at the factory must be deactivated, refer to VEHICLE ELECTRICAL SYSTEM FACTORY MODE, DEACTIVATING .

If the Vehicle Electrical System Control Module will be replaced

-- Perform "code Vehicle Electrical System Control Module", refer to CODING .