Steering Wheel: Installing
Install in reverse order of removal. Note the following:
Make sure the wheels are in the straight-ahead position before installing the steering wheel.
-- When installing a removed steering wheel: Make sure that the markings on the steering column/wheel align.
-- When installing a new steering wheel (without marking): Steering wheel must be position in center position (steering wheel spoke must be horizontal and wheels in straight-ahead position).
-- Install steering wheel.
-- Install the airbag unit, refer to Removal and Installation .
-- Carry out a road test.
-- If steering wheel is crooked, remove it again and rotate it on steering column splines.
Tightening Specification
| Component | Tightening Specification |
|---|---|
Steering wheel bolt
|
30 Nm + 90° |