Condenser Overview
- Screws
- 5 Nm
- For attaching the condenser to the radiator
- Condenser with Fluid Reservoir
- 2 versions
- Removing and installing, refer to CONDENSER
- Radiator
- Removing and installing, refer to[For engine(s) CPRA, CPKA] Removal and Installation[For transmission(s) 0A4, 09G] [For engine(s) CBTA, CBUA] Removal and Installation[For transmission(s) 02E] [For engine(s) CDVB] Removal and Installation[For transmission(s) 0A4, 02E, 02Q] [For engine(s) CKRA] Removal and Installation or [For engine(s) CPRA, CPKA] Removal and Installation[For transmission(s) 0A4, 09G] [For engine(s) CBTA, CBUA] Removal and Installation[For transmission(s) 02E] [For engine(s) CDVB] Removal and Installation[For transmission(s) 0A4, 02E, 02Q] [For engine(s) CKRA] Removal and Installation
- Reservoir with Dryer CartridgeNOTE:
Under certain conditions, the dryer cartridge should no longer be replaced each time the refrigerant circuit is opened, refer to A/C SYSTEM, GENERAL INFORMATION .
Depending on the type of engine, the reservoir is installed on the right or left of the condenser.
- Dryer cartridge, removing and installing, refer to FLUID RESERVOIR
- Condenser Stone Chip Protection Grille
- Only for heavy duty suspension version
- Clip
- For stone chip protection grille
- Connection Location from Refrigerant Line to Condenser
- Screws
- 12 Nm
- Mounting refrigerant line on the condenser