LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Controls, Housing - Direct Shift Gearbox 02E) >> 34 Controls, Housing >> Specifications >> Transmission To Engine Bolt Tightening Specifications >> Gas Engine
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gas Engine

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Bolts On Engine/Transmission Flange
GWWA37-0650Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Item Bolt Nm
1 M12 x 55 80
2 M10 x 45
  • Starter to transmission
40
3 M12 x 55 80
4 M10 x 45
  • Starter to transmission
40
5 M12 x 55
  • Installed from the engine side
80
6 M12 x 55 80
7 M10 x 50 40
8 M10 x 50 40
9 M10 x 45
  • Installed from the engine side
40
10 M12 x 65
  • Installed from the engine side
80
A Alignment sleeve for centering