Instrument Cluster: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition and all electrical consumers and remove the ignition key.

NOTE:

It is not necessary to remove the steering wheel.

-- Pull the steering wheel all the way out and then lower as far down as it will go.

-- Loosen the steering column trim gap cover from the instrument panel, refer to Storage Compartments, Covers and Trim in Removal and Installation .

-- Remove the screws -arrows- from the instrument cluster.

Fig 1: Identifying Instrument Cluster Mounting Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The fixed electrical connection to the instrument cluster is disconnected automatically when the cluster is pulled out of the instrument panel opening. Harness connector is installed permanently in vehicle and is disconnected automatically when pulling out instrument cluster.

-- Remove the instrument cluster from the instrument panel.