LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Maintenance Procedures) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Coolant System, Check Freeze Protection And Coolant Level >> Freeze Protection, Checking And Adding Coolant Additive
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Protection, Checking And Adding Coolant Additive

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

NOTE:

Read the bright/ark boundary to obtain an accurate reading for the following tests. Place a drop of water on the glass to improve the readability of the bright/dark boundary. The bright/dark boundary can be clearly recognized on the "WATERLINE".

-- Check the coolant additive concentration using the Refractometer T10007 A. Refer to the Owner's Manual.

The refractometer scale -1- is designed for coolant additives G12; G12 Plus, G12 Plus Plus and G11.

Fig 2: Identifying Scales On Refractometer: Coolant Additive G12 Plus -1- And Coolant Additive G13 -2-
GWWN01-11032Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The scale -2- is designed only for coolant additive G13.

-- Drain some of the coolant and add coolant additive if the freeze protection (refer to COOLANT LEVEL, CHECKING AND FILLING ) if the frost protection is inadequate.

NOTE:

If you cannot clearly determine which coolant additive is in the coolant system, use the scale -2- for coolant additive G13.

Follow all disposal regulations.

-- Check the freeze protection after the road test.