LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (2.0L - Ignition/Glow Plug System - Engine Code: CCTA) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Knock Sensor 1 -G61- >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor 1 -G61-: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2018 Volkswagen Tiguan Limited, 2017 Volkswagen Tiguan, 2016 Volkswagen Tiguan, 2015 Volkswagen Tiguan, and 2014 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the electrical connector -2- from the Knock Sensor 1 -G61-.

Fig 1: Identifying Camshaft Position Sensor G40 / Intake Manifold Runner Position Sensor G336, Knock Sensor (KS) 1 G61 & Fuel Injectors 8-Pin Harness Connector Electrical Harness Connectors
GWWA24-10427Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the coolant pump, refer to COOLANT PUMP .

NOTE:

The Knock Sensor 1 -G61- is located below the intake manifold behind the coolant pump.

-- Remove the Knock Sensor 1 -G61-.