LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat TDI SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (2.0L - Generic Scan Tool - Engine Code: CVCA) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Automatic Glow Time Control Module -J179-, CHECKING >> Final Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedures

WARNING: This page is about a different car, the 2015 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

After repair work, the following work steps must be performed in the following sequence:

  1. Check the DTC memory. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .
  2. If necessary, erase the DTC memory. Refer to DIAGNOSTIC MODE 04 - ERASE DTC MEMORY .
  3. If the DTC memory was erased, generate readiness code. Refer to READINESS CODE .
scientia non olet · About LEMON Manuals