LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat TDI SE, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing - Direct Shift Gearbox 02E >> 34 Controls, Housing >> Removal And Installation >> Selector Lever Handle >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Handle: Removing

-- Move the selector lever into the "D" position.

It is not necessary to pull out the button -arrow- manually. The button locks in the installed position by itself when the handle is removed.

Fig 1: Handle With Button In Front
GWWN37-10463Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover.

with a Handle with a Sleeve 

-- Push the plastic part under the handle in the direction of -arrow- and unlock the handle.

Fig 2: Disengaging Knob
GWWN34-10550Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

with a Handle with a Clamp 

Fig 3: Clamp Under Boot
GWWN37-10466Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Cut the clamp under the boot -arrow- with side cutters.

Continuation for All 

-- Disconnect the connector from the cover.

-- Pull the handle up. Do not press the button while doing this.

NOTE:

Do not push the button once the handle has been removed otherwise it will not be possible to install the handle again.