April 5, 2026: LEMON Manuals is launched! Read the announcement.

ATF Cooler, Rectangular Version: Installing

WARNING: This page is about a different variant/trim than selected.

Tightening specification. Refer to AUTOMATIC TRANSMISSION FLUID COOLER OVERVIEW .

Install in reverse order of removal. Note the following:

NOTE:

Always replace O-rings.

-- Install the catalytic converter. Refer to [For engine(s) CBTA,CBUA] Removal and Installation [For engine(s) CVCA] Removal and Installation [For engine(s) CPRA,CPKA] Removal and Installation .

-- Install the coolant hoses to the ATF cooler according the markings made during the removal.

-- Check the coolant level. Refer to [For engine(s) CPRA,CPKA] General Information [For engine(s) CBTA,CBUA] General Information [For engine(s) CVCA] General Information .

-- Install the battery tray and the battery. Refer to [For engine(s) CVCA,CDVB,CPRA,CBTA,CPKA,CKRA,CBUA] Removal and Installation .

-- Check the ATF level. Refer to AUTOMATIC TRANSMISSION FLUID LEVEL, CHECKING AND ADDING .

-- Install the engine cover and the air filter. Refer to [For engine(s) CPRA,CPKA] Removal and Installation [For engine(s) CBTA,CBUA] Removal and Installation .