Transmission to Engine Tightening Specifications

Transmission to Engine Tightening Specifications






1 - Driving Direction

- Drive plate to torque converter

• 60 Nm

• Quantity: 6

• Remove and install using the socket SW15 (V/175)

- M12 Bolts

• 80 Nm

• 65 Nm, if using the insert tool 18 mm (T10179)

- M10 Bolts

• 40 Nm

• The bolts are located in the lower flange

- Arrows

• Alignment sleeves for centering the transmission.

- Make sure the bracket does not touch the Automatic Transmission Fluid (ATF) cooler.






Nut - 8 Nm