If the Specified Value Was Not Obtained
-- REMOVE: Engine Control Module -J623-. Refer to appropriate service information.
-- CHECK: Engine Speed Sensor -G28- electrical connector to the Engine Control Module -J623- electrical connector.
| Engine Speed Sensor -G28- electrical connector terminals: | Engine Control Module -J623- electrical connector T60 terminals: |
|---|---|
| 1 | 59 |
| 3 | 52 |
Specified Value: 0.5 Ω (± 0.3 Ω)
If the specified value was Not obtained:
-- CHECK: wiring for an open, high resistance or short
-- CHECK: wiring connection for damage, corrosion, loose or broken terminals
-- REPAIR: faulty wiring or connection
-- GO TO: Final Procedures
If the specified value was obtained:
-- REPLACE: Engine Control Module (ECM) - J623 -. Refer to appropriate service information.
-- GO TO: Final Procedures