LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Passat 3.6 SEL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (2.0L - Exhaust System, Emission Controls - Engine Code: CKRA) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Tightening Specifications: Notes

WARNING: This page is about a different variant/trim than selected.
Component Fastener Size Nm
Clamping Sleeve
-- With Two Individual Clamps - 25
-- With a Continuous Clamp - 35
Control Line to Particulate Filter Fitting - 45
Exhaust Door Control Unit to Exhaust Pipe Clamp (1) - 7
Exhaust Gas Recirculation Cooler to Cylinder Block Bolt - 9
Exhaust Gas Recirculation Pipe to Cylinder Head Bolt - 9
Exhaust Gas Recirculation Pipe to Exhaust Gas Recirculation Cooler Bolt - 9
Exhaust Gas Recirculation Pipe to Exhaust Gas Recirculation Vacuum Regulator Solenoid Valve Bolt - 9
Exhaust Gas Recirculation Temperature Sensor to Exhaust Gas Recirculation Pipe - 20
Exhaust Pressure Sensor 1 -G450- to Turbocharger - 45
Exhaust Gas Temperature Sensor 2 -G448- and Exhaust Gas Temperature Sensor 3 -G495- to Particulate Filter - 45
Exhaust Gas Temperature Sensor 4 -G648- to Front Exhaust Pipe with Particulate Filter - 45
Heated Oxygen Sensor - G39- to Particulate Filter (2) - 50
NOx Reduction Catalytic Converter Suspended Mount to Subframe Bolt - 25
NOx Reduction Catalytic Converter to Exhaust Door Control Unit Clamp (1) - 7
NOx Reduction Catalytic Converter to Front Exhaust Pipe with Particulate Filter Nut - 23
NOx Sensor Control Module to Underbody Nut - 6
NOx Sensor to NOx Reduction Catalytic Converter - 52
Particulate Filter to Particulate Filter Bracket Nut - 23
Rear Muffler Suspended Mount to Body Bolt - 25
Reducing Agent Delivery Module to Reducing Agent Tank Lock Ring - 80
Reducing Agent Injector to NOx Reduction Catalytic Converter Clamp (1) - 5
Reducing Agent Pump to Reducing Agent Delivery Module Bolt - 5
Reducing Agent Tank to Underbody Bolt - 25
Shield to Particulate Filter Nut - 10
Tunnel Bridge to Underbody Bolt - 23
Turbocharger to Particulate Filter Clamp (1) - 7
(1) Always replace.
(2) Coat Only The Threads With Hot bolt paste G 052 112 A3.