Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Bolted Connections | Tightening Specifications | |||
|---|---|---|---|---|
| - | M5 | 4.5 Nm | ||
| Bolts and Nuts | M6 | 10 Nm | ||
| - | M7 | 15 Nm | ||
| - | M8 | 20 Nm | ||
| - | M10 | 40 Nm | ||
| - | M12 | 65 Nm (1) | ||
| Manual transmission | Refer to [For transmission(s) 0A4] Specifications[For transmission(s) 02Q] Specifications[For transmission(s) 02E] Specifications . | |||
| DSG® | Refer to [For transmission(s) 0A4] Specifications[For transmission(s) 02Q] Specifications[For transmission(s) 02E] Specifications . | |||
| A/C compressor | Refer to Specifications . | |||
| Subframe | Refer to Special Tools . | |||
| Drive axle | Refer to Special Tools . | |||
| Engine/transmission mount | Refer to FASTENER TIGHTENING SPECIFICATIONS . | |||
| Particulate filter | Refer to FRONT EXHAUST PIPE WITH PARTICULATE FILTER . | |||
|
||||