Cooling System
WARNING:
The coolant system is under pressure when the engine is warm.
Risk of scalding due to hot steam and hot coolant.
Reduce pressure by covering the coolant expansion tank cap with a cloth and carefully opening.
CAUTION:
Note the following whenever working inside the engine compartment due to limited space:
- Route all lines and wires in their original locations.
- Ensure sufficient clearance to all moving or hot components.
NOTE:
When the engine is warm the cooling system is under pressure. If necessary release pressure before beginning any repair work.
Secure all hose connections with clamps, allocation.
Spring type clip pliers VAS 6499 are recommended for installing spring type clamps.
Always replace gaskets and seals.
The arrows on the coolant pipes and coolant hoses must line up across from each other.