LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Jetta TDI, 4D Sedan, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Direct Shift Gearbox - Controls, Housing - Transmission Code: 02E (Sedan) >> 34 Controls, Housing >> Diagnosis And Testing >> Selector Mechanism, Checking
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Mechanism, Checking

WARNING:

Move the selector lever into "P" and set the parking brake before working with the engine running.

Do not operate the starter when the selector lever is in "R", "D" and "S".

If selector lever position "N" is selected at speeds greater than 5 km/h, the shift lock solenoid must not engage and block the selector lever. The selector lever can be moved into a another gear.

For speeds below 5 km/h (almost standstill) and shifting into selector lever position "N", the shift lock solenoid must only engage after approximately 1 second. The selector lever can be moved out of "N" only when the brake pedal is pressed.

Selector lever in "P" and the ignition turned on:

The selector lever is locked and cannot be moved out of "P" when the locking button is pressed. The shift lock solenoid blocks the selector lever.

The shift lock solenoid releases the selector lever. It is possible to shift into a gear. Slowly move the selector lever slowly from "P" through "S" ; while doing this, check whether display of selector lever position in instrument panel insert matches actual selector lever position.

Selector lever in "N" and ignition switched on:

The selector lever is locked and cannot be moved out of "P" when the locking button is pressed. The shift lock solenoid blocks the selector lever.

The shift lock solenoid releases the selector lever. It is possible to shift into a gear.

Selector level in the "tiptronic" position

The illuminated "D" in the cover must turn off. The "+" and "-" must turn on.

The transmission range display in the instrument cluster must change from "P R N D S" to "6 5 4 3 2 1" when the selector lever is moved into the Tiptronic gate.

The ignition and lights must be turned on

The appropriate symbol is being lit up in shift mechanism cover.

Transmission Range Display 

Simultaneous lighting of all segments of transmission range selector lever display indicates transmission is in emergency running mode.