Steering Wheel

Special tools and workshop equipment required 

• Torque wrench V.A.G 1332

Removing 

-- Remove driver side airbag unit. Refer to Removal and Installation .

-- Turn steering wheel into center position (wheels in straight ahead position).

Fig 1: Identifying Turn Steering Wheel Into Center Position

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove bolt -3- and pull steering wheel -2- off steering column.

Installing 

-- Install the steering wheel -2- on the steering column.

-- Center markings for steering wheel and steering column -arrows- must align.

Fig 2: Identifying Center Markings For Steering Wheel

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Guide the steering angle sensor -G85- connector -1- into the opening inside the steering wheel.

-- Secure steering wheel with bolt -3-.

-- Install the driver side airbag. Refer to Removal and Installation .

Tightening Specifications