Windshield Wiper System
Follow the procedure in the appropriate service information when disconnecting and connecting the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .
Additional information:
Refer to the appropriate service information.
General Description
The Wiper Motor Control Module -J400- is integrated with the Windshield Wiper Motor -V-.
To remove wiper blades, wiper arms must be driven into service/winter position. The service/winter position is activated by operating windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition. Refer to the appropriate service information.
DTC Recognition and Display
Vehicle Electrical System Control Module -J519- is equipped with On Board Diagnostics (OBD) which assists in troubleshooting.
Use the Vehicle Diagnosis, Testing and Information System VAS 5051A under "Guided Fault Finding".