Service Interval Display, Coding
-- Connect the Vehicle Diagnosis Tester Refer to VEHICLE DIAGNOSIS TESTER .
-- Switch the ignition on.
-- Touch "Guided Functions".
NOTE:
If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for the Vehicle Diagnosis Tester.
-- Select in succession:
- Brand
- Type
- Model year
- Engine code
-- Confirm vehicle identification.
-- Select in succession:
- "Instrument Cluster"
- "Adapt service interval extension."
-- Perform the Adaptation following the "Guided Functions" prompts.
End Adaptation
-- Select Go to and then press End .
-- Turn off ignition and disconnect diagnostic connection.