Front Level Control System Sensor Assembly Overview
NOTE:
A replacement front left and right level control system sensor -G78/G289- comes complete with the coupling rod and the upper and lower retaining plate.
Replace with subframe installed.
- Subframe
- Bolt
- M6 x 16
- 9 Nm
- Left Front Level Control System Sensor -G78- and Right Front Level Control Sensor -G289-
- Complete with components.
- Lever -arrow- must point toward vehicle exterior.
- Removing and installing, refer to FRONT LEFT AND RIGHT LEVEL CONTROL SYSTEM SENSOR .
- If the left front level control system sensor and the right front level control sensor were removed and installed, then a basic setting to the adaptive chassis DCC must be performed. Refer to ADAPTIVE CHASSIS DCC, BASIC SETTING .
- After replacing, perform basic setting of the headlamps in "Guided Fault Finding" function using Vehicle Diagnosis, Testing, and Information System VAS 5051.
- Wishbone
- Nut
- 9 Nm
- Self-locking
- Always replace after removal.