Driver Outside Door Handle

Driver Outside Door Handle

The following components are integrated in driver side outside door handle

• Driver exterior door handle touch sensor (G415)

• Driver access/start authorization antenna (R134)

• The complete outer door handle must always be replaced if malfunctioning.

• No coding, basic setting or adaptation is necessary when outside door handle is replaced. Erase the entry in the DTC memory in "Guided Fault Finding" with the Vehicle diagnosis, testing and information system (VAS5051B).

Removal

- Switch off the ignition and all electrical consumers and remove the ignition key.

- Remove the left front exterior door handle.

Installation

Install in reverse order of removal.