Selector Mechanism Without Housing: Removing

-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE .

Fig 1: Identifying Electrical Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the center console. Refer to "Storage Compartments, Covers and Trim" in Removal and Installation .

-- Disconnect the connector -1- from the selector mechanism.

-- Remove the air filter housing. Refer to Removal and Installation

-- Pry the cable -1- off the selector shaft lever -3- using a wrench -2-.

Fig 2: Identifying Selector Lever Cable, Lever/Selector Shaft And 10mm Open-End Wrench

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

The retainers on the selector lever cable break very easily. The complete selector mechanism with cable must be replaced if one of the tabs breaks off.

-- Squeeze the retainers together on the selector lever cable -arrows- and remove the selector lever cable from the cable bracket.

-- Do not bend the cable.

-- Remove the selector lever cable -1- from the bracket -arrow- on the transmission.

Fig 3: Identifying Clip Securing Selector Lever Cable

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the center tunnel underbody trim under the selector mechanism. Refer to Description and Operation .

-- Remove the 4 bolts.

Fig 4: Identifying Removal Of Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the selector mechanism.

Fig 5: Identifying Removal Of Selector Mechanism

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.