Selector Lever Handle: Installing

Install in the reverse order of removal. Note the following:

The selector lever is in the "D" position.

NOTE:

There is the possibility that the button can be pressed into the handle. Never install the handle when the button is pressed in.

Fig 1: Identifying Caution For Button

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Move the button into the installed position. Refer to HANDLE BUTTON, MOVING INTO THE INSTALLED POSITION .

A new handle is delivered with an assembly aid. Pull out the assembly aid in the -direction of the arrow- just before installing the new handle.

Fig 2: Identifying Direction To Pull Out Assembly Aid Just Prior To Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the handle all the way onto the selector lever and lock it.

-- Push the sleeve down to lock it.

-- Press the button after installing it.

NOTE:

If the button stays in the handle after being pressed, this means it was installed incorrectly. If this happens, remove the handle again and move the button into the installed position again. Refer to HANDLE BUTTON, MOVING INTO THE INSTALLED POSITION . Reinstall the handle again.