Vehicle Electrical System Control Module -J519-
Vehicle Electrical System Control Module -J519- and relay carrier on Vehicle Electrical System Control Module -J519- are one component and cannot be replaced separately.
If Vehicle Electrical System Control Module -J519- or the relay carrier is to be replaced, the work procedure "Vehicle Electrical System Control Module coding" to read out the codes stored in the module must always be performed, refer to Vehicle Electrical System Control Module -J519-, CODING .
Additional information:
=> 416The Passat CC
=> 340The Passat 2006 - Electrical Equipment
Refer to appropriate System Wiring Diagram Information
Refer to Owner's Manual.
General Description:
Vehicle Electrical System Control Module -J519- performs the following tasks in the vehicle:
- Electric load management
- Exterior light control
- Turn signal control
- Wipers, rear window
- Rear window defogger
- Interior light control
- Shift-/selector gate illumination
- Terminal control
- Dimming, instrument illumination
- Fuel Pump (FP) supply
- Pre-energizing of generator
- Horn
- Warning lamp
The following functions can be adapted:
- Adapting high beams as assisting driving light, refer to ADAPTING HIGH BEAMS AS ASSISTING DRIVING LIGHT .
- Adapting assisting driving light delay, refer to ASSISTING DRIVING LIGHT DELAY, ADAPTING .
- Adapting footwell light dimmer value, refer to FOOTWELL LIGHT DIMMER VALUE, ADAPTING .
- Setting Coming Home Time, refer to ADAPTING COMING HOME TIME .
- Setting Leaving Home Time, refer to ADAPTING LEAVING HOME TIME .
- Setting headlamp cleaning system "on time" (headlamp cleaning time), refer to HEADLAMP WASHER SYSTEM, ADAPTING .
- Adapting "shut-off time" of heater function for rear window and exterior mirror, refer to SHUT-OFF TIME OF HEATER FUNCTION FOR REAR WINDOW AND EXTERIOR MIRROR, ADAPTING .
- Daytime Running Lamps, Coding and Decoding, refer to DAYTIME RUNNING LAMPS, CODING AND DECODING
Adaptations listed above are dependent on vehicle equipment level and market version.
Diagnostic Trouble Code (DTC) Recognition and Ddisplay:
Vehicle Electrical System Control Module -J519- is equipped with On Board Diagnostics (OBD) which assists in troubleshooting.
The "Guided Fault Finding" function is to be used for troubleshooting of one of the systems described as in "Vehicle Diagnosis, Testing and Information System", refer to VEHICLE DIAGNOSIS, TESTING AND INFORMATION SYSTEMS .