Removal And Installation: Installation

WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order, paying attention to the following:

Clean the thread on the A/C compressor shaft of old locking compound before installing.
Clean the A/C compressor flange before mounting the ribbed belt pulley.
Install the circlip on the proper side, the side with beveled insertion edge faces away from A/C compressor (install flat side facing compressor).
Replace the hex bolt -5-, refer to item 5.