Windshield Washer System, Installing

WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert wiper motor with frame and linkage into vehicle.

-- Screw in upper mounting bolts -1-.

Fig 1: Identifying Upper Mounting Bolts -1-, Lower Nut With Washer -2- And Motor -3-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install lower nut with washer -2-.

-- Tighten all threaded connections to specified torques shown in WINDSHIELD WIPER SYSTEM OVERVIEW .

-- Connect connector -1- to wiper motor connection until it engages.

Fig 2: Identifying Wiper Motor Connector -1-, Wire Bracket -2- And Motor -3-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clip in wire bracket -2- into retaining plate bore.

-- Install plenum chamber cover and plenum chamber seal in reverse order.

-- Connect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Install wiper arms. Refer to WINDSHIELD WIPER ARM .