April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cellular Phone Bracket, Changing

WARNING: This page is about a different car, the 2011 Volkswagen CC, 2010 Volkswagen CC, and 2009 Volkswagen CC. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

There is no preparation for the cellular telephone bracket when the instrument panel is being replaced.

The opening for the cellular phone bracket must be cut by hand.

The work will be performed from the back of the instrument panel.

The opening is next to the slot for the radio -arrow- on the right side.

-- Place the instrument panel on a soft surface.

Fig 1: Identifying Opening Next To Slot For Radio -Arrow- On Right Side

GWWN91-11700

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drill both holes with a 6.5 mm drill bit -arrows-.

Fig 2: Drilling Both Holes With 6.5mm Drill Bit -Arrows-

GWWN91-11701

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drill the holes -1 through 4-. Make additional holes as needed.

Fig 3: Drilling Holes -1 Through 4- With Additional Holes As Needed

GWWN91-11702

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Cut out the material.

-- Unclip the bolt mount from the old instrument panel and install the new one -arrows-.

Fig 4: Unclipping Bolt Mount From Old Instrument Panel To Install New One -Arrows-

GWWN91-11703

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn over the instrument panel and file the edges -arrow-.

Fig 5: Turning Over Instrument Panel And Filing Edges -Arrow-

GWWN91-11704

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Make sure the bracket mount is aligned when installing it. The bolt mount may also need to be aligned.

-- Alternately tighten the screws -arrows-.

Fig 6: Alternately Tightening Screws -Arrows-

GWWN91-11705

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Guide the wiring harness -1- through the opening and clip it into the bracket.

-- Guide the wiring harness through the opening -1-. Make sure the cradle mount fits correctly in the bracket -arrows-.

Fig 7: Guiding Wiring Harness Through Opening -1-

GWWN91-11706

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.