Fuel Delivery Unit/Fuel Level Sensor: Notes
NOTE:
After removing the fuel delivery unit, check the fuel tank for visible contamination and clean if necessary.
Hose connections are secured with either spring type or clamp type clamps.
Always replace clamp type clamps with spring type clamps.
Fuel hoses at the engine must only be secured with spring type clamps. The use of clamp or screw type clamps is not permissible.
Hose Clip Pliers VAS6340 are recommended for installing spring type clamps.
Special tools and workshop equipment required
- Wrench - Fuel Sending Unit T10202
- Torque Wrench 1332 40-200Nm VAG1332
- Trim Removal Wedge 3409