Battery, Transmitter And Receiver Unit, Fuse And Wiring Harness, Overview

Fig 1: Battery, Transmitter/Receiver Unit - Fuse And Wiring Harness, Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. Positive Connection
   • Red wire with suitable connection.
2. To Terminal 15a
   • Connection to terminal 15a.
   • Ensure wire is protected by fuse.
   • Fuse maximum 15 amps
3. Antenna Ground
   • Ensure correct ground connection to body.
   • Antenna location must be treated with suitable corrosion protection.
4. Transmitting/Receiving Antenna
   • Installation locations, refer to TRANSMITTED OUTPUT, ANTENNA INSTALLATION LOCATIONS .
5. Shielded Antenna Wire
   • Wire with coaxial connector.
6. Telephone Or Two-Way Radio Transmitter/Receiver Unit
7. Wiring Harness
   • Voltage supply positive via red wire, 2.5 mm² cross section.
   • Voltage supply negative via brown wire, 2.5 mm² cross section.
   • If necessary, wire to terminal 15a via black wire 1.5 mm ² cross section.
8. Fuse Holder
   • Attach next to the battery.
9. To Starter
10. Battery
    • Installation location in engine compartment.
11. Negative Wire
12. Body Ground