LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2012 >> Beetle Turbo, 2.0L Eng VIN 8, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> 2.0L - Generic Scan Tool - Engine Code: CCTA (Hatchback) >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Turbocharger Recirculating Valve Checking >> Checking Wiring
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Wiring

-- Remove the Engine Control Module -J623-. Refer to the Repair Information.

-- Using a multimeter, check the Turbocharger Recirculating Valve -N249- electrical harness connector terminal to Engine Control Module -J623- electrical harness connector T60 for an open circuit.

Turbocharger Recirculating Valve -N249- electrical harness connector terminal: Engine Control Module -J623- electrical connector T60 terminal:
2 50

Specified value: 1.5 Ω max.

If the specified value was Not obtained:

-- Check the wiring for an open or high resistance.

-- Check the electrical harness connector for damage, corrosion, loose or broken terminals.

-- If necessary, repair the faulty wiring connection.

If no malfunction is detected in the wiring and if the resistance and voltage supply was OK:

-- Replace the Engine Control Module -J623-. Refer to the Repair Information.

-- Install the engine cover with air filter. Refer to the Repair Information.