Function Test

-- Perform the function test in Diagnostic Mode 06. Refer to DIAGNOSTIC MODE 06 - READ TEST RESULTS FOR SPECIFIC DIAGNOSTIC FUNCTIONS .

-- Switch the ignition Off.

If the specified values are exceeded:

-- Check the exhaust system for leaks.

-- If necessary, repair the leak in the exhaust system.

-- Erase the DTC memory. Refer to DIAGNOSTIC MODE 04 - ERASE DTC MEMORY .

-- Perform a road test to verify Repair.

If the DTC does not return:

Erase the DTC memory. Generate readiness code. Refer to READINESS CODE .

If no leaks are found in the exhaust system:

-- Replace the catalytic converter with front exhaust pipe. Refer to the Repair Information.