Control Module HVAC: Service and Repair

Fresh Air Blower Control Module (J126)

Removing

- Fresh Air Blower (V2) and fresh air blower control module, removing, refer to => [ Fresh Air Blower (V2) with Fresh Air Blower Control Module (J126) ] Fresh Air Blower (V2) with Fresh Air Blower Control Module (J126).

- Disconnect the connector - 3 - from the fresh air blower control module - 4 -.

- Remove the bolts - 2 - (2 Nm).

- Remove the fresh air blower control module - 4 - from the fresh air blower - 1 -.






Installing

Install in reverse order of removal.