Fastener Tightening Specifications - Controls, Housing

Fastener Tightening Specifications

=> [ Transmission to Engine Tightening Specifications ]






Transmission to Engine Tightening Specifications






1 - Driving Direction

- Drive Plate to Torque Converter

• 60 Nm

• Quantity: 6

• Remove and install using the socket SW 15 (V/175).

Bolt - M12

• 80 Nm

• 65 Nm, if using the insert tool 18 mm (T10179)

Bolt - M10

• 40 Nm

• The bolts are located in the lower flange.

Arrows - Alignment Sleeves

- Make sure the bracket does not touch the transmission fluid cooler.






- Nuts -: 8 Nm