Connecting Rod, Engine

Connecting Rod

Bolt 45 Nm + an additional 90° (1/4) turn.

Always replace.
Use an old bolt to measure the radial play.
Do not turn the additional 90° (1/4) turn when measuring the radial play.
Lubricate the threads and contact surface.

Axial play:
New: 0.10 to 0.35 mm
Wear limit: 0.4 mm

Measure radial clearance using Plastigage(R):
New: 0.020 to 0.060 mm
Wear limit: 0.090 mm
Do not rotate the crankshaft when measuring the radial play.






Crankshaft Dimensions

(Dimensions are in mm)





1 The preparation of worn crankshafts is not provided.