Glow Plugs, Removing And Installing: Installing

-- Carefully install the glow plugs by hand or with a hose without bending it.

-- Use a Glow Plug Socket:3220  or a Glow Plug Socket:VAS6454  with a suitable torque wrench to tighten the glow plugs.

• Glow Plug Tightening Specification: 17 Nm 

-- Connect the glow plug connector to the corresponding glow plug and make sure it is secure in the connector.

Install In Reverse Order Of Removal. 

• Intake manifold flap motor tightening torque - assembly overview. Refer to OVERVIEW - INTAKE MANIFOLD