Electronic Steering Column Lock Control Module -J764-, Removing And Installing: Installing: Notes

Install In Reverse Order Of Removal.Note The Following:

If only the Electronic Steering Column Lock Control Module -J764- was replaced, use the previously used control module bolt.
If the steering column was replaced, the Electronic Steering Column Lock Control Module -J764- is already installed on the new steering column.

-- Install the Electronic Steering Column Lock Control Module -J764- -1- with the pin in the groove -arrow- in the steering column.

Fig 1: Identifying Electronic Steering Column Lock Control Module -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolt.

NOTE:

If the same steering column and the same Electronic Steering Column Lock Control Module -J764- are being installed, then it is not necessary to adapt the Electronic Steering Column Lock Control Module -J764- again.

If the Electronic Steering Column Lock Control Module -J764- was replaced, then it must be reprogrammed.

If the steering column is replaced, the Electronic Steering Column Lock Control Module -J764- is already installed on the new steering column and does not need to be modified.

If the steering column with an Electronic Steering Column Lock Control Module -J764- was replaced, the Electronic Steering Column Lock Control Module -J764- must be adapted.

Use the Vehicle Diagnostic Tester.

Body (Repair Groups 01, 27 and 50 through 97)

Body (repair group 01 and 50 through 77)

01_OBD-capable systems

05_Access and start authorization J393

09_Access and start authorization functions